Realme 9i RMX3493 Firmware Stock ROM (Flash File)

Realme 9i RMX3493 Latest Flash File used for flash and unlock your device fix pattern lock, FRP and other problems like hang on logo, brick after software update or in any experiment , fix hanging issue and other software related issues. Realme flash tool required login credential to run, if you don’t have then contact me for flash. it’s paid service. Always use latest flash file to flash your device.

Download Realme 9i RMX3493 FLASH FILE

RMX3493GDPR_11_F.06_2023080320320000

RMX3493GDPR_11_A.11_2022060905020000

ALL DRIVER FREE DOWNLOAD

PAID FILE

Reseller India
———————–
Ramzan Gsm
Gsm Online Services
Country : India
WhatsApp, https://wa.me/919036266587
Call +919036266587
Website : https://www.ramzangsm.com/

ALL MOBILE FLASHING UNLOCKING HANG ON LOGO FIX

SERVICE AVAILABLE VIA ULTRA VIEWER / TEAM VIEWER

ABOUT: Realme 9i RMX3493

The Realme 9i (RMX3493) is a budget-friendly smartphone launched in January 2022, offering a smooth display, long battery life, and decent performance for everyday use. It is the successor to the Realme 8i, with some improvements in battery efficiency and design.

📱 Specifications:

• Display: 6.6-inch IPS LCD, 90Hz refresh rate, FHD+ (2412 × 1080 pixels), 480 nits brightness
• Processor: Qualcomm Snapdragon 680 (6nm, Octa-core) (Power-efficient but not for heavy gaming)
• GPU: Adreno 610
• RAM & Storage:
  • 4GB RAM + 64GB Storage
  • 4GB RAM + 128GB Storage
  • 6GB RAM + 128GB Storage
  • Expandable storage via microSD (Dedicated slot)
• Cameras:
  • Rear: 50MP (main) + 2MP (macro) + 2MP (depth)
  • Front: 16MP AI Selfie Camera
• Battery: 5000mAh with 33W Dart Charging (0-100% in ~70 minutes)
• Software: Realme UI 2.0 (Android 11) (Upgradable to Realme UI 3.0, Android 12)
  

  Warning:

• Flashing your device will erase all data. Backup your important data before proceeding.Ensure you are using the correct firmware for your device to avoid bricking it.—
  

  Requirements:

• 1. MSM Download Tool
  Download the appropriate version for Realme 9i.2. Firmware File
  Obtain the correct official firmware for the Realme 9i RMX3493.3. Qualcomm USB Drivers
  Install Qualcomm drivers to allow your computer to detect the device in EDL (Emergency Download Mode).4. USB Cable
  Use the original or a high-quality USB cable.5. Windows PC
  The MSM Tool only works on Windows.

  —

  Steps to Flash Realme 9i RMX3493:
  1. Install Required Drivers

  Install the Qualcomm USB drivers on your PC.

  Restart your computer after installation.

  2. Download Firmware and MSM Tool

  Extract the firmware and MSM Download Tool files into a folder.

  3. Put Device in EDL Mode

  Turn off the device.

  Press and hold Volume Up + Volume Down buttons together.

  Connect the device to the PC via a USB cable while holding the buttons.

  4. Open MSM Download Tool

  Launch the MSM Download Tool as an administrator.

  Enter the credentials (if required). Usually, “oppo” or “realme” is used as the password.

  5. Load the Firmware

  In the MSM Download Tool, click on the Load Firmware button.

  Navigate to the extracted firmware folder and select the correct .ofp file.

  6. Detect Device

  Ensure your device is detected in the tool. It should appear as a COM port (e.g., COM3 or COM4).

  7. Start Flashing

  Click the Start button in the MSM Download Tool.

  Wait for the process to complete (this may take 5-10 minutes).

  Once completed, you will see a “Download Complete” message.

  8. Reboot Device

  Disconnect the device and power it on.

  —

  Troubleshooting Tips:
  Device Not Detected:
  Check if the Qualcomm drivers are properly installed. Use another USB cable or port if necessary.

  MSM Tool Error:
  Ensure the tool matches your device model and firmware. Disable antivirus temporarily as it may block the tool.

  Boot Loop After Flashing:
  Perform a factory reset by booting into recovery mode.