Realme 7 Pro RMX2170 Firmware Stock ROM (Flash File)
Realme 7 Pro RMX2170 Latest Flash File used for flash and unlock your device fix pattern lock, FRP and other problems like hang on logo, brick after software update or in any experiment , fix hanging issue and other software related issues. Realme flash tool required login credential to run, if you don’t have then contact me for flash. it’s paid service. Always use latest flash file to flash your device.
Download Realme 7 Pro RMX2170
Latest Firmware
RMX2170export_11_F.18_2022072119460000
RMX2170GDPR_11_C.32_2022060916230000
ALL DRIVER FREE DOWNLOAD
Reseller India
———————–
Ramzan Gsm
Gsm Online Services
Country : India
WhatsApp, https://wa.me/919036266587
Call +919036266587
Website : https://www.ramzangsm.com/
ALL MOBILE FLASHING UNLOCKING HANG ON LOGO FIX
SERVICE AVAILABLE VIA ULTRA VIEWER / TEAM VIEWER
ABOUT:Realme 7 Pro RMX2170
The Realme 7 Pro (RMX2170) is a mid-range smartphone launched by Realme in September 2020. It offers a premium feel with features focused on performance, display quality, fast charging, and camera performance.
Key Specifications:
- Display:
- 6.4-inch Super AMOLED display
- Full HD+ resolution (2400 x 1080 pixels)
- 60Hz refresh rate
- 180Hz touch sampling rate
- In-display fingerprint scanner
- Processor:
- Qualcomm Snapdragon 720G chipset
- Octa-core CPU (2x 2.3 GHz Kryo 465 Gold & 6x 1.8 GHz Kryo 465 Silver)
- Adreno 618 GPU
- RAM & Storage:
- 6GB/8GB RAM options
- 128GB internal storage
- Expandable storage via microSD card (up to 256GB)
- Camera:
- Rear camera: Quad-camera setup
- 64 MP (primary, f/1.8, Sony IMX682 sensor)
- 8 MP (ultra-wide, 119° field of view)
- 2 MP (macro)
- 2 MP (depth sensor)
- Front camera: 32 MP (wide angle) for selfies
Warning:
Flashing your device will erase all data. Backup your important data before proceeding.Ensure you are using the correct firmware for your device to avoid bricking it.
Requirements:
1. MSM Download Tool
Download the appropriate version for Realme 7 PRO.2. Firmware File
Obtain the correct official firmware for the Realme 7 PRO RMX 2170.3. Qualcomm USB Drivers
Install Qualcomm drivers to allow your computer to detect the device in EDL (Emergency Download Mode).4. USB Cable
Use the original or a high-quality USB cable.5. Windows PC
The MSM Tool only works on Windows.—
Steps to Flash Realme 7 PRO RMX 2170.
1. Install Required DriversInstall the Qualcomm USB drivers on your PC.
Restart your computer after installation.
2. Download Firmware and MSM Tool
Extract the firmware and MSM Download Tool files into a folder.
3. Put Device in EDL Mode
Turn off the device.
Press and hold Volume Up + Volume Down buttons together.
Connect the device to the PC via a USB cable while holding the buttons.
4. Open MSM Download Tool
Launch the MSM Download Tool as an administrator.
Enter the credentials (if required). Usually, “oppo” or “realme” is used as the password.
5. Load the Firmware
In the MSM Download Tool, click on the Load Firmware button.
Navigate to the extracted firmware folder and select the correct .ofp file.
6. Detect Device
Ensure your device is detected in the tool. It should appear as a COM port (e.g., COM3 or COM4).
7. Start Flashing
Click the Start button in the MSM Download Tool.
Wait for the process to complete (this may take 5-10 minutes).
Once completed, you will see a “Download Complete” message.
8. Reboot Device
Disconnect the device and power it on.
—
Troubleshooting Tips:
Device Not Detected:
Check if the Qualcomm drivers are properly installed. Use another USB cable or port if necessary.MSM Tool Error:
Ensure the tool matches your device model and firmware. Disable antivirus temporarily as it may block the tool.Boot Loop After Flashing:
Perform a factory reset by booting into recovery mode.
- Rear camera: Quad-camera setup