Realme 13 Pro 5G RMX3990 Flash File (Stock ROM)

Realme 13 Pro 5G RMX3990 Flash File used for flash and unlock your device fix pattern lock, FRP and other problems like hang on logo, brick after software update or in any experiment , fix hanging issue and other software related issues. Realme flash tool required login credential to run, if you don’t have then contact me for flash. it’s paid service. Always use latest flash file to flash your device.

Download Realme 13 Pro 5G RMX3990 FLASH FILE

RMX3990export_11_14.1.0.500EX01_2024092021480000

ALL DRIVER FREE DOWNLOAD

PAID FILE

Reseller India

———————–
Ramzan Gsm
Gsm Online Services
Country : India
WhatsApp, https://wa.me/919036266587
Call +919036266587
Website : https://www.ramzangsm.com/

ALL MOBILE FLASHING UNLOCKING HANG ON LOGO FIX

SERVICE AVAILABLE VIA ULTRA VIEWER / TEAM VIEWER

ABOUT: Realme 13 Pro 5GRMX3990

The Realme 13 Pro 5G (model RMX3990) is a mid-range smartphone announced in July 2024.

✅Key Specifications of Realme C63 5GRMX3990

  📱Display and Design:

• Screen: 6.7-inch OLED

• Resolution: 2412 x 1080 pixels (FHD+)

• Refresh Rate: 120Hz

• Brightness: Typical brightness of 600 nits, global maximum of 1200 nits, local peak brightness of 2000 nits

• Design: Monet-inspired design, available in Monet Gold, Monet Purple, and Emerald Green colors

  ⚡Performance:

• Processor: Qualcomm Snapdragon 7s Gen 2 5G chipset

• CPU: Octa-core, up to 2.4 GHz

• GPU: Adreno 710

• RAM Options: 8GB or 12GB

• Dynamic RAM Expansion: Up to an additional 12GB

• Storage Options: 128GB, 256GB, or 512GB

  📸Camera System:

• Rear Cameras:

  • Primary: 50MP Sony LYT-600 sensor with Optical Image Stabilization (OIS)

  • Ultra-Wide: 8MP

• Front Camera: 32MP Sony sensor

Warning:📵

Flashing your device will erase all data. Backup your important data before proceeding.

Ensure you are using the correct firmware for your device to avoid bricking it.

—

Requirements:🛠️

1. MSM Download Tool
Download the appropriate version for Realme 13 PRO 5G.

2. Firmware File
Obtain the correct official firmware for the Realme 13 Pro 5G RMX3990.

3. Qualcomm USB Drivers
Install Qualcomm drivers to allow your computer to detect the device in EDL (Emergency Download Mode).

4. USB Cable
Use the original or a high-quality USB cable.

5. Windows PC
The MSM Tool only works on Windows.

—

Steps to Flash Realme 13 Pro 5G RMX3990
1. Install Required Drivers

Install the Qualcomm USB drivers on your PC.

Restart your computer after installation.

2. Download Firmware and MSM Tool

Extract the firmware and MSM Download Tool files into a folder.

3. Put Device in EDL Mode

Turn off the device.

Press and hold Volume Up + Volume Down buttons together.

Connect the device to the PC via a USB cable while holding the buttons.

4. Open MSM Download Tool

Launch the MSM Download Tool as an administrator.

Enter the credentials (if required). Usually, “oppo” or “realme” is used as the password.

5. Load the Firmware

In the MSM Download Tool, click on the Load Firmware button.

Navigate to the extracted firmware folder and select the correct .ofp file.

6. Detect Device

Ensure your device is detected in the tool. It should appear as a COM port (e.g., COM3 or COM4).

7. Start Flashing

Click the Start button in the MSM Download Tool.

Wait for the process to complete (this may take 5-10 minutes).

Once completed, you will see a “Download Complete” message.

8. Reboot Device

Disconnect the device and power it on.

—

Troubleshooting Tips:
Device Not Detected:
Check if the Qualcomm drivers are properly installed. Use another USB cable or port if necessary.

MSM Tool Error:
Ensure the tool matches your device model and firmware. Disable antivirus temporarily as it may block the tool.

Boot Loop After Flashing:
Perform a factory reset by booting into recovery mode.